The EPEVER Tracer AN Series Solar Cost Controller is really a hugely economical photo voltaic controller designed for off-grid solar methods. Determined by multiphase synchronous rectification technologies, it guarantees optimized Vitality conversion and technique security for a wide array of photovoltaic (PV) apps.
Vital Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technological know-how for top-quality photo voltaic Electrical power harvesting. Key features consist of:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Sophisticated MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for enhanced battery life.
LCD Display screen with serious-time details checking.
Many Load Handle Modes which include manual and timer.
Comprehensive Digital Protections versus overcharging, around-discharging, small circuits, and reverse polarity.
Action-by-Action Guide to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Guarantee all elements are incorporated: Tracer AN unit, temperature sensor, communication cables, and person handbook.
Validate the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a well-ventilated, dry area near the battery financial institution.
Secure the Tracer AN controller using the delivered mounting brackets.
Retain right clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always abide by right security protocols and ensure the procedure is run off ahead of connecting elements.
Step one: Hook up the battery terminals for the charge controller (good to optimistic, negative to destructive).
Action 2: Connect the photo voltaic visit here panel array on the PV input terminals.
Step three: Link the load terminals if using a immediate load link.
Step four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery initial.
Utilize the Liquid crystal display Show to navigate the settings menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Handbook, timer, mild control.
five. Monitoring and Facts Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port working with computer software such as Photo voltaic Station PC.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Challenge 1: No Power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Change program parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Advantages of the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification technology assures:
Higher Effectiveness: Reduced Vitality losses all through conversion.
Enhanced Trustworthiness: Secure effectiveness under variable masses.
Longer Battery Existence: Dependable and accurate charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is an Excellent option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above set up guide, consumers can assure maximum efficiency and technique longevity.